Update Firmware
Attention: Account data, wireless data and all settings will be deleted.
Fernsehfee updater and Fernsehfee must then be updated again.
Apps you can secure before using your Google account.
How to install the new firmware:
1. Download files (see below)
2. Copy files to USB stick
3. Upgrade App -> Local
4. tc_firmware_1.img flash (if not available, press Menu button 10 times)
5. wait for reboot
6. Upgrade App -> Local
7. tc_patch_1a.img flash
8 Wait for reboot
9. Immediately open Fernsehfee Updater
If the device does not boot:
1. Remove power cable
2. With paper clip into the small hole puncture (between the HDMI cable + satellite) and keep
3. Connecting the power cable
4. Wait a few seconds
5. Remove paper clip
6. Device starts in "Recovery Mode".
7. Connect USB-Stick
8. Apply update from EXT
9. Update from Udisk (USB)
10. tc_firmware_1.img flash
11. tc_patch_1a.img flash 12 "reboot system now" to restart
Fernsehfee updater and Fernsehfee must then be updated again.
Apps you can secure before using your Google account.
How to install the new firmware:
1. Download files (see below)
2. Copy files to USB stick
3. Upgrade App -> Local
4. tc_firmware_1.img flash (if not available, press Menu button 10 times)
5. wait for reboot
6. Upgrade App -> Local
7. tc_patch_1a.img flash
8 Wait for reboot
9. Immediately open Fernsehfee Updater
If the device does not boot:
1. Remove power cable
2. With paper clip into the small hole puncture (between the HDMI cable + satellite) and keep
3. Connecting the power cable
4. Wait a few seconds
5. Remove paper clip
6. Device starts in "Recovery Mode".
7. Connect USB-Stick
8. Apply update from EXT
9. Update from Udisk (USB)
10. tc_firmware_1.img flash
11. tc_patch_1a.img flash 12 "reboot system now" to restart
Current Dual Core Version
Also install this patch:
Old Single Core Version
AML file
When a main menu with Fernsehfee appears (Space Design) everything is OK. The box is then used immediately, 09/05/2013.
Then the usual, install WiFi, Creating Fee Account.
Please then make the same update, so the apps on the app "Fernsehfee update" klicFken. Before you click Connect to the Internet.
If you have clicked to have no internet, remembers the (old) Updater unfortunately this for an hour and there is no update.
In that case, please reboot the box, establish Internet, then click Updater.
If no robot picture: Copy the data to an SD card
and the factory_update_param editable file. Replace with:
package = / Udisk / ........
Udisk to sdcard
hold in with the SD card and power button.
Thx to slowmotion9
From here the source code for firmware + GNU GPL license at its own window (popup permit).
This product includes software which wholly or partially as free software the
Lizenbestimmungen the GNU General Public License, version 2 (GPL)
subject. The source code of the software is available at
http://www.fernsehfee.de/gnu. The full license text can be seen also
There. For details, see http://www.gnu.org/licenses/old-licenses/gpl 2.0
Since this is free software, the developers of this software include the
Liability to the extent permitted by law.
When a main menu with Fernsehfee appears (Space Design) everything is OK. The box is then used immediately, 09/05/2013.
Then the usual, install WiFi, Creating Fee Account.
Please then make the same update, so the apps on the app "Fernsehfee update" klicFken. Before you click Connect to the Internet.
If you have clicked to have no internet, remembers the (old) Updater unfortunately this for an hour and there is no update.
In that case, please reboot the box, establish Internet, then click Updater.
If no robot picture: Copy the data to an SD card
and the factory_update_param editable file. Replace with:
package = / Udisk / ........
Udisk to sdcard
hold in with the SD card and power button.
Thx to slowmotion9
From here the source code for firmware + GNU GPL license at its own window (popup permit).
This product includes software which wholly or partially as free software the
Lizenbestimmungen the GNU General Public License, version 2 (GPL)
subject. The source code of the software is available at
http://www.fernsehfee.de/gnu. The full license text can be seen also
There. For details, see http://www.gnu.org/licenses/old-licenses/gpl 2.0
Since this is free software, the developers of this software include the
Liability to the extent permitted by law.